
Tube
CM67se
$895
Back-order · ships when built
Dual-diaphragm tube condenser inspired by the U67 — warm, full, three-dimensional on vocals and guitars.
Overview
The CM67se is a large dual-diaphragm tube condenser microphone inspired by the famous Neumann U67 design and specifications. The CM67 has an ultra-smooth natural rise above 10khz and is a favorite for group vocals and singers who want a very detailed sound. It is also a favorite microphone for recording acoustic instruments.
Pheonix Drive performing vocals with the CM67se in omni position. You may notice a few others too
Advanced Audio’s AK67 capsule is a very accurate 35mm capsule with 6-micron German mylar diaphragms. Its frequency response matches within 2 dB the response of the Neumann K47 capsule used in Neumann’s K67 tube and U87 microphones.
The CM67 features an upgraded 6072a circuit that provides a lower output impedance with slightly more headroom than the circuit used in the original U67. In addition, it provides a faster transient response when driving our the very HiFi output transformer, which is wound to the original Neumann specs. The transformer will deliver +14dBu with less than .5% distortion and with a flat response down to 20Hz.
AK67 1.07"/35mm capsule with 6-micron diaphragms
9 pick-up patterns selectable from the power supply
Class A 6072a 2-stage tube circuit
Dual bobbin output transformer with Bi-metal laminations (6.5:1 ratio)
-10db pad switched from the front of microphone body
80HZ HP filter switched from the from to microphone body
Maximum output level > +14dbu.
Frequency response
Measured at FOX Audio Research, Toronto · CM67se



Specifications
- Frequency response
- 20Hz to 20kHz ±3db
- Noise
- <14dB(A-weighted)
- Impedance
- <200 ohm(load impedance <1.2K)
- Distortion
- 0.5% @ 126dB and 136db with pad engaged
- Power supply
- Included · 7-pin umbilical
- Warranty
- Service-backed, in-house




